Features#
BB-Config v1.x#
PRU Enable/Disable#
Enable/Disable PRU
GPIO#
Turn On/Off gpio
GPIO Menu#
GPIO Setting#
EMMC and MicroSD Stats#
Storage stats & grow partition
LEDs#
Config board build in LEDs
Password#
Change users password
SSH#
Enable/Disable SSH
WiFi#
Connect to Wi-Fi
Internet Sharing and Client Config#
Note: You’ll have to configure your host Following is an example script:
echo 1 > /proc/sys/net/ipv4/ip_forward
iptables --table nat --append POSTROUTING --out-interface wlp4s0 -j MASQUERADE
iptables --append FORWARD --in-interface wlp4s0 -j ACCEPT
About#
BB-Config v2.x#
ADC (Graph)#
Plot graph for Analogue pin
DAC (PWM)#
Generate PWM waveform
uEnv#
Enable/Disable boot configuration
services#
Enable/Disable services startup at boot
PINMUX#
Display PIN I/O detail
Config PINMUX
Hardware Display#
Pin Table References#
Pin Config#
Overlay (dts)#
Enable/Disable Device Tree Overlay in Boot option
Select dtbo file and automate update in uEnv.txt
WiFi (D-Bus)#
Connect to WiFi with wpa_supplicant
Support for Debian 11
